INQUIRE NOW
BACK TO BLOG
Regional Sourcing Guide · Thailand

Pilates Equipment for Studios in Thailand — Factory-Direct on FOB Shanghai

Bangkok, Chiang Mai, Phuket, Pattaya — if you are fitting out a studio in Thailand, these are the decisions worth settling before you order: the equipment mix for a compact room, how FOB Shanghai handover works when your studio sits on the other side of the Gulf of Thailand, and what humidity does to upholstery and springs over a Bangkok year.

Quick answer

We ship to Thailand on FOB Shanghai terms. KCONE handles export packing and hands the cargo over at the Shanghai port; your Thai forwarder arranges the main freight and the import formalities at Laem Chabang or Bangkok.

The equipment is metal, not timber. Carbon steel frames with full coating coverage, 304 stainless on the Cadillac TBK and Half Tower TBHT — relevant in a country where humidity sits high most of the year.

Plan the room before the models. A studio of roughly 60–120 m² running group classes usually lands on four to eight reformers plus one or two pieces that add a second class format.

KCONE PILATES · 13 NOVEMBER 2026

What actually decides a Thailand fit-out

Three things, roughly in this order:

  • Floor area costs more than the machines. In central Bangkok, rent per square metre shapes the equipment list as much as the budget does. A studio in Sukhumvit or Thonglor is often fitting equipment into a room that was not built for it. That pushes buyers toward pieces that earn their floor area — a Cadillac or half tower that carries several class formats — rather than a room filled with reformers only.
  • Humidity runs the maintenance calendar. Upholstery, springs and ropes age faster in a hot, humid room than the frame does. Planning them as service parts from day one is cheaper than replacing them in a panic.
  • Import is the buyer's half of the job. On FOB Shanghai, the Thai side arranges freight, clearance and duty. Studios that have not imported before usually appoint a forwarder before ordering, not after.

How FOB Shanghai works when your studio is in Thailand

The sequence is the same for every destination, and it is worth knowing before you compare quotations from different suppliers:

  1. We pack and hand over at Shanghai. Machines ship in export wooden crates. Packed dimensions, package count and packed weight are supplied with the quotation, because that is what your forwarder prices against.
  2. Your forwarder books the sea freight. The usual Thai gateways are Laem Chabang for Bangkok and the eastern seaboard, with smaller volumes sometimes routed differently. Transit time depends on the sailing and on whether the container is shared with other suppliers — your forwarder confirms it per booking; we work to the schedule agreed at order confirmation.
  3. You clear and receive. Import duty, VAT and local delivery are handled on the Thai side. We provide the commercial invoice, packing list and the certificate of origin your broker asks for.

If your forwarder needs anything beyond that, tell us before production rather than after the container closes — documents are easier to prepare in advance than to add later.

The equipment mix for a typical Bangkok studio

This is planning guidance, not a fixed package. Sizes below assume a room of roughly 60–120 m² running group classes with 4–8 clients:

Room sizeTypical coreWhy
Around 60–80 m²4–6 × Reformer TSH + 1 × Wunda Chair TBWReformer classes carry the schedule; the chair adds a second format without taking floor space.
Around 80–100 m²6 × Reformer TSH or TBH + 1 × Half Tower TBHT + 1 × Ladder Barrel TBTThe tower and barrel support the one-to-one and small-group work that raises the hourly rate.
100–120 m² and up8 × Reformer + 1 × Cadillac TBK + 1 × Wunda Chair + 1 × Ladder BarrelA Cadillac opens rehabilitation and teacher-training bookings; it also becomes the piece clients ask about.

Two practical notes for Thai rooms: allow clearance at both ends of the carriage travel, not only between machines, and check the ceiling height before ordering a Cadillac — the TBK stands 2229 mm with a 655 mm bed height.

Humidity, sweat and the parts that wear

Nothing in the Temnox range is timber, so there is nothing to swell, warp or dry out across the wet season. Four things decide how the equipment holds up in a hot room:

  • Frames. Carbon steel with full coating coverage on the reformers and the Wunda Chair; 3.0 mm-wall 304 stainless steel on the Cadillac TBK; 304 stainless round tube on the Half Tower TBHT. Check coating coverage at welds and cut edges when the crates arrive.
  • Upholstery. Imported leather, cleaned with a pH-neutral product rather than a solvent. Wipe down after class instead of at the end of the day — sweat left on the surface is the usual cause of early wear.
  • Springs and ropes. Consumables, covered for one year. In a hot room, plan them as a maintenance cycle with a defined replacement interval rather than waiting for a spring to feel different mid-class.
  • Moving parts. The reformers use four heavy-duty silent pulleys with premium bearings plus the 360° silent rope pulley; a dry, air-conditioned room is not required, but a dusty one will shorten bearing life.

What to put in your RFQ

Send these in one message and the quotation can be complete the first time:

  • Model list and quantities, or the room dimensions and the class formats you plan to run.
  • Ceiling height, if a Cadillac or half tower is in the mix.
  • Your destination port or city, and whether you already have a forwarder in Thailand.
  • Preferred colour and whether you need any customisation on the upholstery or branding.
  • Target opening date — it tells us whether the schedule is realistic before you commit.
  • Business role (studio, distributor, training academy) so the commercial terms match it.

If you want the specification detail behind any model, the reformer buying guide and the frame material comparison cover it in more depth.

Frequently asked questions

Do you ship Pilates equipment to Thailand?

Yes. KCONE supplies studios, distributors and training facilities in Thailand on FOB Shanghai terms. We handle export packing and handover at the Shanghai port, and your forwarder arranges the main freight into Laem Chabang or Bangkok. Packed dimensions, package count and packed weight are supplied with the quotation so the freight can be priced accurately.

What are the trade terms for a Thai order?

FOB Shanghai only — we do not quote other Incoterms. Under FOB, KCONE delivers the equipment to the port in Shanghai and hands it over to the carrier your forwarder nominates; from that point the main international freight, import clearance, duty and local delivery are on the buyer's side.

Can KCONE handle Thai import clearance?

No — on FOB Shanghai terms, import clearance is the buyer's responsibility. We supply the commercial invoice, packing list and the certificate of origin your broker requires, and we can prepare any additional document your forwarder asks for if it is requested before production rather than after the container closes.

What about spare parts and warranty in Thailand?

Every machine carries a three-year warranty on the frame and core structure, and one year on consumable parts — springs, ropes, pulleys and upholstery. Spare parts are shipped from the factory; state your destination city at the order stage so the parts routing and any reorder cycle are agreed up front.

Which equipment suits a small Bangkok studio?

For a room of roughly 60–80 m², a practical starting point is four to six Reformer TSH units plus one Wunda Chair TBW, which gives reformer classes plus a second format without extra floor space. Share your room dimensions, ceiling height and class formats and we will propose a mix against the published specifications.

Sourcing for a studio in Thailand?

Send your model list, destination port and target opening date. We reply within one working day with specifications, MOQ, lead time and a quotation on FOB Shanghai terms.

REQUEST A QUOTATION
WhatsApp+86 185 5050 8086 Email[email protected]